Is the Ribbon Mixer Customizable?
The answer is a big YES!
The ribbon mixer can be customized according to your specific requirements for your products.
The construction of a ribbon mixer:
A ribbon mixer construction is a U-shaped horizontal tank with a rotating twin spiral ribbon stirrer. The agitator’s shaft is centered in the tank with spiral ribbons.
Please click the video: https://youtu.be/gIs6PBKzOjQ
The Advantages of the Ribbon Mixer:
- It is a multifunctional mixing machine with a steady operation, consistent quality, low noise, long life, and simple installation and maintenance.
- Discharge sealing has no dead angles when discharging.
- Full welding is so important for food and pharmaceutical machines. The powder is easy to hide in gaps, which may pollute fresh powder if residual powder goes bad. But full-welding and polishing can make no gap between hardware connections, which can show machine quality and usage experience.
- It has a safety switch, a grid, and wheels for safe use.
- Easy to clean when cleaning the ribbon mixer. It is safe to clean, less hassle, and less time-consuming.
- It gives you less time during mixing. The ribbon mixer can be set from 1 to 15 minutes.
- Charging or feeding powdered material to the ribbon mixer can ensure convenience and satisfaction.
- It is easy to operate and guarantees safe operation.
The mixing speeds:
A ribbon mixer takes 5–10 minutes to be effective in mixing. For smaller models such as 100L, 200L, and 300L, the mixing time is within 3 minutes. Larger models, such as 3000L, 5000L, and 10,000, require more time to mix materials. Dry and solid ingredients are a simple process that can be easily blended by the ribbon mixer. It can handle the bulk density of ingredients and give the right-sized result.
The application of a ribbon mixer:
A ribbon mixer is essential in the processing of a wide range of products. It can customize mixing solutions for construction, agricultural chemicals, food, polymers, pharmaceuticals, and other industries by mixing powders with liquids and granules. Ingredients are properly mixed using a ribbon mixer.
Is the ribbon mixer waterproof?
The standard-design powder mixer is not fully waterproof. You can clean the tank inside by water washing freely, but the electrical control box, motor, and gear are not waterproof. You need to wipe with a dry or wet cloth. However, these parts can be customized to a water-proof design, to make a stainless-steel shade to cover the control box button and the motor and gearbox, then you can wash the whole machine with water freely. This requirement should be known before placing the order.