A V mixer is a versatile and effective mixing machine for homogeneously combining and lubricating dry materials. It works best with powders, granules, and similar materials. The V shaped mixer has two openings on top of a “V” shaped tank to discharge the materials at the end of the mixing process.

We have ribbon blender, horizontal ribbon mixer, paddle ,and V mixer.

 

Shanghai Tops Group V Type Mixer

v mixer

V mixer is composed of a mixing tank, plexiglass door, control panel system and other components. It consists of a work-chamber connected by two cylinders forming a “V ” shaped mixer. The inner and outer surface of the mixing tank is fully welded and polished. 

100L V mixer

The TP-V100 has a volume of 100 liters. This is the smallest model of the V shaped mixer. This is suitable for mixing powder, granules type materials, etc. The V mixer mixes two or more powders or granular materials evenly. There are 50% in total of useful capacity.

Plexiglass Safe Door

The V shaped mixer has a unique design with a plexiglass safe door. The base is made up of stainless steel square tubes. The frame is made up of stainless steel round tubes. Also, a safety button is installed for the operator’s safety.

How Does the V-Mixer Work?

The V mixer machine  is made up of two cylinders that are positioned in a “V” shaped mixer. The recommended blender’s fill-up volume is 40 to 60% of the overall mixing volume. 

V mixing uniformity with more than 99%, which means that the product in the two cylinders moves into the central common area with each turn of the v type mixer, and this process, is done continually.

v blender pic
v mixer with powder

Mixing with Powder

In the food industry, powder is usually used for mixing. This V mixer is very useful and efficient for mixing any kind of powder. The V mixer machine has two cylinders that move the powder into the central common area with each turn of the mixer. It takes 5–15 minutes to mix two or more powdered materials evenly.

There is 50% total useful capacity and more than 99% uniformity in mixing. 

CE, CSA and UL Certificates

certificates
certificate

All our products have CE certificates that comply with the safety standard. Our products have been evaluated and comply with safety, health, and environmental standards. You can be sure that our products are built correctly for maximum safety.

We have CSA and UL certificates, which means that our products have been independently tested and certified to meet industry standards. It is certified to satisfy established safety and performance criteria.

Banner
Item TP-V100 TP-V200
Total Volume 100L 200L
Effective Loading Rate 40%-60% 40%-60%
Power 1.5kw 2.2kw
Stirrer Motor Power 0.55kw 0.75kw
Tank Rotate Speed 0-16 r/min 0-16 r/min
Stirrer Rotate Speed 50r/min 50r/min
Mixing Time 8-15mins 8-15mins
Charging Height 1492mm 1679mm
Discharging Height 651mm 645mm
Cylinder Diameter 350mm 426mm
Inlet Diameter 300mm 350mm
Outlet Diameter 114mm 150mm
Dimension 1768x1383x1709mm 2007x1541x1910mm
Weight 150kg 200kg

FAQ

1.What Materials are Used to Construct a V Mixer?

The following materials are used in V mixers:

-304 stainless steel. It can also be made of stainless steel 316, but it depends on the customer’s requirements.

-Internal finish parts are fully welded and brightly polished.

-External finish parts are fully welded and brightly polished.

– You can ensure that it meets the good grade standard.

2.How Many Minutes is the Mixing Time?

V mixer machine takes 5 – 15 minutes to mix two or more powder and granular materials. For instance, if the amount of material in the v mixer is increased to 50% from the total volume, it is required to work by batch in filling material inside the tank and the time required for homogeneous mixing might be doubled.

3.What is the Capacity of a V shaped Mixer?

The v shaped mixer consists of 3 models with a total capacity of 100, 200 and 500 liters and a useful capacity of 50% of the total. The v mixer recommended blender’s fill-up volume is 40 to 60% of the overall mixing volume. For this, the materials inside the machine can move freely and result in a good mixture. With mixing uniformity of more than 99%, which means that the product in the two cylinders moves into the central common area with each turn of the blender, this process is done continually. The materials in the chamber will be fully mixed.

4.Why Do I Need or Want a V Type Mixer?

 You will need a v type mixer because this machine is suitable to mix more than two kinds of dry powder and granular materials in pharmaceutical, chemical and food industries. It can be equipped with a forced agitator according to the user’s requirements, so as to be suitable for mixing fine powder, cake and materials containing certain moisture. Also it helps you to lessen time consuming in your workload and can guarantee safe operation.

5.Why Is It Done in Batches When Placing Products?

The amount of material put into the v mixer has an impact on its efficiency. The v mixer recommended blender’s fill-up volume is 40% to 60% of the overall mixing volume. For this the materials inside the machine can move freely and result in a good mixture. For instance, if the amount of material in the v mixer is increased to 50% from the total volume, it is required to work by batch in filling material inside the tank and the time required for homogeneous mixing might be doubled. With uniformity of more than 99%, this means that the product in the two cylinders moves into the central common area with each turn of the v mixer, and this process is done continually.

6.Why Would V Mixer Have the Capacity to Mix Granules/Powdered?

V mixer machine has the capacity to mix granules/powder because this machine is equipped with forced agitator according to user’s requirements, so as to be suitable for mixing fine powder, cake and materials containing certain moisture. It consists of a work-chamber connected by two cylinders forming a v shaped mixer. It has two openings on top of the v shape tank that enables the v mixer machine to conveniently discharge the materials at the end of the mixing processes.

7.How’s The Quality of the V Shaped Mixer?

Qualities of a V shaped mixer machine:

-Discharge sealing has no dead angles when discharging.

-Fully welding is so important for food and pharmaceutical machines. Powder is easy to hide in gaps, which may pollute fresh powder if residual powder goes bad. But full-welding and polish can make no gap between hardware connections, which can show machine quality and usage experience.

-Easy to clean when cleaning the V mixer. It is safe to clean, less hassle and less time consuming.

-Charging or feeding powder material to the v mixer can ensure convenience and satisfaction.

-V type mixer feeding inlet has a removable cover which is made of stainless steel and rubber sealing edible silicone strips. It is easy to operate through pressing the lever and it gives good performance.

8.Why Does It Have a V-Shaped Design?

V mixer is a newly design of powder mixer and it is formed of V shape because it consists of two inclined cylinders that connect together in a form of V shape. It has two openings on top of the “V” shape tank that enables the v mixer to conveniently discharge the materials at the end of the mixing process. The “V” shape design allows the materials to move around freely, resulting in a good mixture.

9.What Are the Advantages of a V Type Mixer?

-Advantages of a V Type Mixer:

-To make the workload less time consuming.

-Safe to use because it has a plexiglass safe door and safety switch.

-Charging and discharging of material is easy.

-With an adjustable speed converter.

-Easy and safe to clean.

-Easy to operate and use.

-Long lasting service life.

10. How Long Does Shipping Take?

V mixer machine to ship takes 7-10 days to produce a standard model. For a customized v mixer machine, your machine can be done in 30-45 days. However, a v mixer shipped by air takes 7-10 days. V mixer machine shipped by sea take 10-60 days. It depends on the distance of your location.   

11.What Industries Usually Use a V Type Mixer?

This V-type mixer is commonly used in dry solid blending materials and is commonly used in the following applications:

-Pharmaceuticals: mixing prior to powders and granules.

-Chemicals: metallic powder mixtures, pesticides, herbicides, and many more

-Food processing: cereals, coffee mixes, dairy powders, milk powder, and many more.

-Construction: steel preblends, etc.

-Plastics: mixing of master batches, mixing of pellets, plastic powders, and many more.

When using a V-type mixer, it helps to combine two or more ingredients to make the best and most exact result of a product. It is easy to use and it takes just minutes to be done.

Send Your Inquiry Today
Scroll to Top