The V powder mixer is a new and unique design of mixing blender from Shanghai Tops Group that comes with a glass door. It can combine more than two types of dry powder and granular materials. It has two openings on top of the “V” shaped tank that conveniently discharges the materials at the end of the mixing process, and it can produce a solid-solid mixture.
We have horizontal ribbon blender, paddle and V mixer.
Detailed Parts
V-shaped, frame, a plexiglass door, a control panel system, and other parts. The base is made of square stainless-steel tubes. The frame is made of stainless-steel round tubes that can be easily cleaned.
A time relay based on the material and mixing process. For feeding and discharging materials, an inching button is used to turn the tank to the appropriate charging (or discharging) position.
The feeding inlet has a movable cover that is easily operated by pressing the lever. Edible silicone rubber sealing strips with excellent sealing performance and no pollution. It is made of stainless-steel construction.
The machine has a safety plexiglass door with a safety button, and when the door is open, the machine stops automatically, keeping the operator safe.
The inside is fully welded and polished. Discharging is simple and hygienic, with no dead angles. It has a removable (optional) intensifier bar that aids in increasing mixing efficiency.
The outer surface is fully welded and polished, there is no material storage, and cleaning is simple and safe. Outside of the tank, all materials are stainless 304.
How does a V Powder Mixer Work?
A V powder mixer produces an exact mixture by combining two symmetric cylinders. It will cause the materials to constantly congregate and scatter. With each turn of the mixer, the product in the two cylinders moves into the central common area. This procedure is repeated on a regular basis.
The materials in the chamber will have been thoroughly mixed.
With Intensifier Bar
A removable (optional) intensifier bar is located inside the V powder mixer. It aids in improving the mixing efficiency of powder material. We can ensure convenience and satisfaction with the V powder mixer by charging it or feeding powdered material to it.
The interior is fully welded and polished. It is simple and safe to clean; there is no dead angle when discharging. It takes 5–15 minutes to evenly mix two or more powdered or granular materials.
More Videos to Show
Features
- With a two-cylinder structure, a mixing time of 3–10 minutes can achieve high efficiency and excellent mixing uniformity.
Internal and external surfaces are fully welded and polished, making them easy to clean. - There is no dead angle inside the mixing tank, and there is no residue when discharged, preventing waste and cross-contamination.
- A plexiglass safety door and a safety button keep the operator safe.
- All stainless steel 304 material is used, with an optional contact part of stainless steel 316, which is suitable for food grade products and has a long service life.
- The new structure design is both safe and easy to clean, as well as visually appealing.
- When charging and discharging, the lid opens easily and securely.
- Application Industry
- Workshop Show
- Data Sheet
| Item | TP-V100 | TP-V200 |
| Total Volume | 100L | 200L |
| Effective Loading Rate | 40%-60% | 40%-60% |
| Power | 1.5kw | 2.2kw |
| Stirrer Motor Power | 0.55kw | 0.75kw |
| Tank Rotate Speed | 0-16 r/min | 0-16 r/min |
| Stirrer Rotate Speed | 50r/min | 50r/min |
| Mixing Time | 8-15mins | 8-15mins |
| Charging Height | 1492mm | 1679mm |
| Discharging Height | 651mm | 645mm |
| Cylinder Diameter | 350mm | 426mm |
| Inlet Diameter | 300mm | 350mm |
| Outlet Diameter | 114mm | 150mm |
| Dimension | 1768x1383x1709mm | 2007x1541x1910mm |
| Weight | 150kg | 200kg |
FAQ
1.Why can’t Mix all Products?
Not all products are suitable for the V powder mixer, which is suitable only for mixing homogeneously combining dry materials. The V powder mixer is suitable for powder type materials, etc. It is commonly used in dry solid blending materials and is commonly used in the following applications:
-Pharmaceuticals: mixing prior to powder.
-Chemicals: metallic powder mixtures, pesticides, herbicides, and many more.
-Food processing: cereals, coffee mixes, dairy powders, milk powder, and many more.
-Construction: steel preblends, etc.
-Plastics: mixing of masterbatches, mixing of pellets, plastic powders, and many more
2.What is the Function of a V-shaped Design?
A V powder mixer consists of two cylinders formed into a V-shape. It has two openings on top of the “V” shaped tank that enables the V powder mixer to conveniently discharge the materials at the end of the mixing process. An intensifier bar can be added to the V mixer, which can help in mixing and breaking up materials. The “V” shaped design allows the materials to move around freely, resulting in a good mixture. With a uniformity of more than 99%, this means that the product in the two cylinders moves into the central common area with each turn of the V blender, and this process is done continually.
3.What are the Primary Materials used in the Construction?
-All materials of the V powder mixer are stainless steel 304.
-Can also be made of stainless steel 316 depending on customers’ requirements.
-Internal finish parts are fully welded and brightly polished.
-External finish parts are fully welded and brightly polished.
4.What is the Best Way to Fill Products?
The amount of material put into the v-powder mixer has an impact on its efficiency. If the amount of material in the v mixer is increased to 50% of the total volume, it requires working by batch in filling material inside the tank and the time required for homogeneous mixing might be doubled. It is recommended that the fill-up volume be 40 to 60% of the overall mixing volume. For this, the materials inside the machine can move freely and result in a good mixture. With a uniformity of more than 99%, this means that the product in the two cylinders moves into the central common area with each turn of the V mixer, and this process is done continually.
5.What Industries make the most use?
A V powder mixer is commonly used in dry solid blending materials and is commonly used in the following applications:
Pharmaceutical industry: mixing prior to powders.
chemical industry: metallic powder mixtures, pesticides, herbicides, and many more.
The food processing industry includes cereals, coffee mixes, dairy powders, milk powder, and many more.
construction industry: steel preblends, etc.
plastic industry: mixing of masterbatches, mixing of pellets, plastic powders, and many more.
6. How Long Is the Shipping of a Machine?
Most of the time, it takes 7–10 days to produce a standard model. For a customized V powder mixer, your machine can be done in 30–45 days. However, a V mixer shipped by air takes 7–10 days. The V mixer shipped by sea takes 10–60 days. It always depends on the location and distance.
7.How do I Select the Best Machine?
In choosing the best V powder mixer, you need to consider the following:
-Choose a suitable model of a V powder mixer. When it comes to decision-making in choosing between what model you want to use for your product or material, you need to consider the total effective mixing volume and total volume. You need to base your decision on choosing a V blender on your product or material density and batch weight. For example, most of your products that will be used in filling the V blender are 50 kg of flour per batch, whose density is 50 L. So, the best choice will be a 100-liter capacity model of a V blender, because the V blender’s recommended fill-up volume is 40 to 60% of the overall mixing volume. For this, the materials inside the machine can move freely and result in a good mixture.
-Choose a high-quality V powder mixer when it comes to quality. You need to consider a high-quality, and here are some of the qualities you need to consider in choosing the best V powder mixer for your product:
-Discharge sealing has no dead angles when discharging.
-Fully welding and polishing can ensure no gap between hardware connections, which can show machine quality and usage experience.
-Easy and safe to clean when cleaning the V powder mixer. It’s less hassle and less time-consuming.
-Charging or feeding powdered material to the V powder mixer can ensure your convenience and satisfaction.
– The V powder mixer feeding inlet has a movable cover, which makes it easy to operate and gives good performance.
8.How long does it Take to mix Materials?
It takes 5–15 minutes to mix two or more powders or granular materials evenly. It is more than 99% mixing uniformity. But if the amount of material or product in the V powder mixer is increased to 50% of the total volume of 100L, 200L or 500L, depending on customer requirements, it requires work by batch in putting material inside the V blender, and the time required for homogeneous mixing might be doubled.
9.Can the Machine Mix Granular Types of Materials?
The V powder mixer is suitable for mixing powder types of materials and is commonly used in the food industry, pharmaceutical industry, and many more. It is recommended that the fill-up volume be 40 to 60% of the overall mixing volume. For this, the materials inside the machine can move freely and result in a good mixture. With a uniformity of more than 99%, the result is homogenous.
10.How to Make Sure That the Quality of the Machine is Good Quality?
The good qualities of a V powder mixers are:
- The V Blender’s internal and external surfaces are fully welded and polished.
- It has safety features.
- The material is made by a trusted brand. The material is rust and corrosion resistant.
- No dead angle when mixing.
- long-lasting service life.
- Safe to operate